Licensed & Insured, in Billings and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Billings
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (406) 717-6530 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Billings and surrounding areas · On-site visits included · Free estimate within 24h
Billings Metal Roofing is a team of local certified professionals based in Billings. We respond quickly in Billings and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (406) 717-6530⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews
“We needed a metal roof on our equipment hangar out past Shepherd and these guys knocked it out in about a week with a four-man crew. The corrugated panels went on straight and they hauled off every last scrap of old tin. Solid outfit.”
Commercial Metal Roofing
“Got tired of patching the old shingles on our brick ranch house and finally went with a full metal replacement. The crew was in and out in three days, and honestly the house looks better than it has in twenty years. Only gripe is they parked the trailer across my driveway one morning, but that's minor.”
Metal Roof Replacement
“Our barn roof was leaking over the hay bales and I was worried about spoilage before winter. Billings Metal Roofing re-fastened panels and replaced a bunch of stripped screws across the whole span in one long day. Bone dry since then, and the price was fair for a farm job.”
Agricultural Metal Roofing
“They installed a standing seam roof on our place in the middle of January, which I figured would be a nightmare. Crew showed up early every morning, kept the snow cleared off the deck, and finished in four days. Really impressed they pulled it off in that cold.”
Metal Roof Installation
“Had a leak that only showed up around the chimney during heavy rain. They got up there, found the flashing was shot, and redid it with new metal the same visit. No more drips and they didn't try to sell me a whole new roof.”
Chimney & Skylight Repair
“We were building a new wood-frame house and had them do the metal roof over the shingle underlayment before we moved in. Straightforward job, clean lines, and the crew was easy to work with around our builder. Happy with how it turned out.”
Metal Roof Over Shingles (Retrofit)
“Went with standing seam for our new build and couldn't be happier with the finish, the panels line up perfectly and the color is exactly what we picked. They walked me through the whole install and left the site spotless. Would use them again in a heartbeat.”
Standing Seam Metal Roofing
“After that big windstorm a bunch of panels on our house got bent up and the flashing pulled loose above the brick. They came out, straightened what they could, replaced the rest, and resealed everything. Took a couple days to get on the schedule but the work itself was top notch.”
Metal Roof RepairReal photos of our work in Billings · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener metal roof install | Starting at $8/sq ft | Includes tear-off, underlayment, eave trim and screw-down panels on a standard pitch. |
| Standing seam metal roof install | Starting at $12/sq ft | Concealed fasteners, raised seam and full flashing package; pitch and panel width move the price. |
| Stone-coated steel or metal shingle install | Starting at $11/sq ft | Textured or stamped panels with underlayment; complex gables and valleys add labor. |
| Deck repair and overlay | On estimate | Older homes often need sheathing replaced or overlaid before metal goes down. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, standard gable | Starting at $10/sq ft | Includes tear-off, deck inspection, underlayment, panels, and standard trim on an accessible single-gable roof. |
| Standing seam, complex roof | Starting at $13/sq ft | Covers multi-gable layout, valleys, and extra flashing on cut-up roofs in the West End and Lake Hills. |
| Standing seam with snow guards | Add per linear foot | Snow guard layout above walkways and doors, priced by the run and the panel pitch. |
| Agricultural or shop building | On estimate | Long panel runs and structural substrates need an on-site measure before a number is given. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal roof replacement, basic ranch | Starting at $9/sq ft | Tear-off, deck inspection, underlayment and new metal panels; low pitch and easy access keep it near this rate. |
| Standing seam replacement | Starting at $12/sq ft | Concealed fasteners and raised seams; complex gables, valleys and chimneys push the rate higher. |
| Stone-coated steel or metal shingle | Starting at $11/sq ft | Textured tile or shingle profiles; historic district and HOA design review can add lead time and cost. |
| Complex or large-scale job | On estimate | Steep pitches, multiple layers, deck repair or copper accents need an on-site look before we quote. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one sound shingle layer | Starting at $7/sq ft | Includes slip sheet, trim, fasteners and standard flashing on a simple gable roof. |
| Standing seam retrofit | Starting at $10/sq ft | Concealed fasteners and premium trim, priced higher for wind and hail performance. |
| Stone-coated or metal shingle retrofit | On estimate | Profile, color and roof complexity drive the number, so we price after an on-site look. |
| Deck repair or added flashing | On estimate | Soft sheathing, chimney and skylight work are quoted after we probe the deck. |
| Travel | Included | In Billings and surrounding Yellowstone County towns, with no separate mileage fee. |
| Estimate | Free | Response within 24 hours at (406) 717-6530, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, reseal, single flashing) | Starting at $450 | Covers small fastener, sealant, or flashing fixes; roof pitch and access move the price |
| Panel replacement (hail or wind damage) | Starting at $850 | Includes removal, matching panel install, and water test; panel type and count drive cost |
| Multi-point storm or ice-dam repair | On estimate | Needs an on-site look to map every failure point and match materials before pricing |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, pipe boot) | Starting at $450 | Covers diagnosis, up to 10 fastener replacements or one pipe boot, and water test; price rises with roof pitch and access difficulty. |
| Flashing or chimney leak repair | Starting at $650 | Includes removal and replacement of failed flashing or boot, sealant, and water test; cost increases with chimney height and panel removal. |
| Seam or panel repair (standing seam) | Starting at $850 | Re-crimping or replacing damaged panel section; price depends on panel profile, length, and whether scaffolding is needed. |
| Widespread fastener failure (re-fastening) | On estimate | Requires full roof inspection and count of failed fasteners; we provide a per-square or per-screw price after on-site review. |
| Emergency tarping after storm | Starting at $350 | Temporary tarp and stabilization to prevent further water damage; final repair quoted separately after inspection. |
| Travel | Included | in Billings and surrounding areas, no separate call-out or mileage fee within 30 miles. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (residential) | Starting at $750 | Covers service call, roof inspection, and replacement of loose or missing screws in the failed area. |
| Full field re-screw (residential) | Starting at $1,450 | Replaces every screw across the panel field with oversized fasteners and new UV-resistant washers. |
| Edge and ridge reinforcement | Starting at $950 | Adds fasteners along gable ends, ridges, and corners where wind uplift is highest on exposed lots. |
| Commercial or agricultural building | On estimate | Large roof area, height, and access determine scope; an on-site look is needed before quoting. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof installation (simple shed or barn) | Starting at $5.50/sq ft | Includes panels, screws, closures and basic trim; price rises with pitch, height and penetrations. |
| R-panel (ribbed) roof installation | Starting at $6.50/sq ft | Stronger ribs and longer spans; cost moves with panel gauge, color and roof complexity. |
| Re-fastening and screw replacement | Starting at $2.00/sq ft | Replaces screws, washers and closures on sound panels; price depends on roof size and access. |
| Complex or large-scale agricultural building | On estimate | Multiple roof sections, lean-tos, skylights or high access need an on-site look before pricing. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal shingle install | Starting at $9/sq ft | Includes tear-off, underlayment, panels and basic flashing on an accessible roof. |
| Slate or shake profile upgrade | Starting at $12/sq ft | Premium textured panels; higher material cost and more layout time per square. |
| Retrofit over existing shingles | On estimate | Depends on existing layer count, deck condition and local code limits on recover. |
| Complex or steep-pitch roof | On estimate | Multi-gable, valleys and height require an on-site look before pricing. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof, standard ranch | Starting at $9/sq ft | Includes tear-off of one shingle layer, underlayment, panels, and standard flashing on a simple gable. |
| Stone-coated steel roof, complex multi-gable | Starting at $12/sq ft | Covers valleys, dormers, and custom flashing on steep West End and Lake Hills homes. |
| Retrofit over existing shingles | Starting at $8/sq ft | Installed over one sound shingle layer, with no tear-off or disposal cost included. |
| Snow guards and ice protection | On estimate | Priced by linear foot and roof configuration; needs an on-site look before a number is given. |
| Travel | Included | In Billings and surrounding areas, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (406) 717-6530, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay, dormer) | Starting at $20/sq ft | Includes flat-lock copper panels, underlayment, and flashing; complexity of the geometry moves the price. |
| Zinc or aluminum specialty panels | Starting at $16/sq ft | Includes concealed-fastener panels and trim; panel profile and seam spacing affect the final rate. |
| Full architectural copper roof | On estimate | Requires an on-site look at deck condition, roof planes, and historic or HOA design constraints. |
| Historic restoration and custom fabrication | On estimate | Templating, shop forming, and soldering for non-standard profiles need an in-person assessment first. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential acrylic coating | Starting at $2.50/sq ft | Includes wash, rust spot treatment, primer, and topcoat on sound residential panels |
| Silicone or polyurethane system | Starting at $3.50/sq ft | Heavier build and longer service life for low-slope, commercial, or hail-exposed roofs |
| Rust treatment and fastener refresh | Starting at $1.50/sq ft | Rust converter, bare metal primer, and replacement of failed washers before coating |
| Large or steep multi-gable roof | On estimate | Steep pitch, height, and access drive the prep time, so we price after an on-site look |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney counterflashing repair | Starting at $600 | Includes custom-bent metal counterflashing, sealant, and labor for one chimney transition. |
| Skylight curb flashing repair | Starting at $750 | Includes curb pan flashing and ice-and-water shield; price rises with decking or curb damage. |
| Valley or dormer flashing replacement | Starting at $900 | Includes opening the valley, new flashing, and re-lapping panels; multi-gable roofs cost more. |
| Complex or large-scale job | On estimate | Multiple transitions, masonry rebuilds, or rotted decking need an on-site look before pricing. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic snow guard layout | Starting at $1,200 | Clamp-on or screw-mounted guards above main entries and walkways on a single roof plane. |
| Multi-zone residential layout | Starting at $2,400 | Guards above several entries, decks, and driveways on a larger multi-gable home. |
| Snow rails and bar systems | Starting at $1,800 | Continuous rails or bars on steep gables where pad spacing alone will not hold the snow. |
| Eave ice protection | Starting at $900 | Ice-and-water membrane and edge metal details at the eave, valleys, and problem corners. |
| Complex or large-scale job | On estimate | Steep pitches, multiple roof planes, and heat cable runs need an on-site look first. |
| Estimate | Free | Response within 24 hours at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and a written repair-versus-replacement assessment with no obligation. |
| Minor panel and fastener repair | Starting at $350 | Replace a few lifted or dented panels and re-secure backed-out screws; price rises with panel count and pitch. |
| Flashing and seam repair | Starting at $550 | Reset chimney, skylight, or ridge flashing and re-crimp lifted seams; access and roof height move the number. |
| Partial re-roof (one slope) | On estimate | Needs an on-site look at deck condition, panel match, and how much of the slope was lost. |
| Travel | Included | in Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walk, photo record, flashing and fastener check, written report with service-life estimate. |
| Insurance documentation inspection | Starting at $250 | Date-stamped hail and wind photos plus report package; roof size and access move the price. |
| Pre-sale or buyer inspection | Starting at $300 | Remaining service life and repair cost summary; steep multi-gable roofs take longer and cost more. |
| Commercial or agricultural roof inspection | On estimate | Large panel counts, penetrations, and access equipment require an on-site look before quoting. |
| Travel | Included | In Billings and surrounding Yellowstone County communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (406) 717-6530, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 5-inch K-style gutter | Starting at $9/linear ft | Includes on-site forming, standard hangers, and outlets; steeper pitches or long runs raise the rate. |
| Seamless 6-inch K-style gutter | Starting at $13/linear ft | Larger trough for steep panels and high volume; access and roof height move the number. |
| Half-round gutter | Starting at $16/linear ft | Traditional profile for historic and copper roofs; fascia condition and custom brackets affect price. |
| Downspouts and extensions | Starting at $12/linear ft | Includes hangers and discharge extensions; longer runs to clear clay soil cost more. |
| Complex or large-scale job | On estimate | Multi-gable roofs, tall access, or historic district review need an on-site look before pricing. |
| Travel | Included | In Billings and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free on-site estimate | Free estimate | Full roof inspection, measurements, and written scope with no obligation to book the work. |
| Agricultural shed or barn re-panel | Starting at $3.50 per sq ft | Exposed-fastener panels, new underlayment, and fasteners; access and roof height move the price. |
| Commercial standing seam installation | Starting at $9 per sq ft | Concealed-fastener panels, underlayment, and trim; parapets and rooftop equipment add labor. |
| Repair and re-fastening | Starting at $450 | Screw replacement, washer renewal, and sealing; number of penetrations and roof pitch drive cost. |
| Travel | Included | in Billings and surrounding Yellowstone County communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (406) 717-6530, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Billings need a crew that understands what Montana weather does to a roof. Billings Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair. We work on the steep gables of South Side Craftsman homes, the low-pitch ranches of Billings Heights, the multi-gable roofs of the West End, and the barns and shops along the Yellowstone River valley. Our network of licensed, insured local contractors handles everything from standing seam to exposed-fastener panels.
From Laurel and Lockwood to Shepherd and Huntley, we serve the neighborhoods beneath the Rimrocks and out across the sagebrush benches. We know the aging screw-down roof stock in this area, where fasteners back out after 15 to 30 years, and we know how heavy snow, chinook winds, and summer hail test every panel. Whether you need a full replacement or a targeted repair, we give you straight answers and honest recommendations for your home and your budget.
Metal roofs are durable, but they are not maintenance-free. The most common failure we see on Billings homes is fasteners backing out as the EPDM sealing washers dry and shrink. On 15 to 30 year old exposed-fastener roofs, this is the number one cause of leaks. Other culprits include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a chinook, and punctures from fallen limbs. Each of these allows water to track along purlins and decking, sometimes far from the entry point, leading to rotted sheathing and damaged insulation if ignored.
When you call us for metal roof repair, we inspect the entire system and explain what we find. Often, a full screw replacement and re-fastening can restore a watertight roof for a fraction of the cost of replacement. We will tell you plainly when a repair makes sense and when it is time to replace. If you have an active leak, call (406) 717-6530 for prompt service.
For leaks specifically, our metal roof leak repair team traces the source and fixes it correctly, not just caulks over the symptom. We also handle screw replacement and re-fastening to extend the life of older roofs. If you are unsure whether to repair or replace, contact us for a free inspection and honest assessment.
We install a range of metal roofing systems to match your home, your budget, and your long-term goals. Standing Seam Metal Roofing offers concealed fasteners and premium durability, with clean lines and no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic homes.
The honest comparison: standing seam costs more upfront but has no exposed fasteners to service, while screw-down panels cost less and require fastener maintenance over their lifespan. For older homes with sound decking, Metal Roof Over Shingles (Retrofit) can be a legitimate option, but we will recommend a full tear-off if the deck is compromised. We match the system to your home, not the other way around.
Metal roof costs in Billings are typically quoted per square foot for installations, while repairs are often flat-rate. Pricing depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. You may see typical ranges advertised, but final pricing depends on your specific roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but you should verify any discounts with your insurer.
For a clearer picture, visit our pricing page or request a free estimate or free roof inspection. We will give you a detailed, no-pressure quote based on your actual roof.
If a storm damages your metal roof, we can inspect it and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, and coverage decisions rest with your carrier. We make no promise that a claim will be approved. We do not waive, discount, absorb, or pay deductibles, and we never suggest that insurance will cover your entire project. Your policy and your carrier determine what is covered.
Regarding permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements, fees, and inspection requirements vary by city and county. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Billings building or planning department before starting your project. For help understanding the process or to schedule a consultation, contact us.
Ready to get started? Billings Metal Roofing serves in Billings and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530
Your Free Quote Request