Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Billings, MT (59101) · Local Professionals

Billings Metal Roofing · Fast response in Billings and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Billings is a city of rooftops that take a beating. From the steep-gabled brick homes on the South Side to the low-slung 1950s ranches in Billings Heights and the sprawling new builds out in the West End, every neighborhood here faces the same trio: heavy wet snow, chinook winds that can swing 40 degrees in a day, and summer hailstorms that pock asphalt shingles like gravel.

That's why more homeowners in 59101 are calling Billings Metal Roofing. We're based right here, we know the Rimrocks and the Yellowstone Valley like the back of our hand, and we've seen what a good standing seam roof can do when the next storm rolls through. Whether you're near Poly Drive or out toward Rehberg Ranch, we're your local metal roofing crew.

Metal Roofing in Billings (59101)

Billings sits at about 3,100 feet in the Yellowstone Valley, right below the pale sandstone Rimrocks. That geography matters for your roof. The clay and gravelly soil under many older neighborhoods can shift with freeze-thaw cycles, and the chinook winds that funnel through the valley can tear at panels if they aren't fastened right. On the South Side and near downtown, you've got early-1900s brick and Craftsman homes with steep gables and deep porches, which means flashing around chimneys and dormers has to be done carefully. Out in Billings Heights and the older neighborhoods along Poly Drive, the low-pitched shingle roofs on 1950s-1970s ranches and split-levels are prime candidates for a metal roof over shingles retrofit, but only if the existing layers are within code. And in the West End, Lake Hills, and Rehberg Ranch, the larger multi-gable roofs on 1990s-2020s homes need a contractor who understands complex valleys and snow shedding. We've worked on all of these, from farmhouses and shops along the Yellowstone River toward Laurel and Lockwood to the newer stucco and stone homes out west.

Our team has been serving Billings and the surrounding area for years, and we've learned that the usual calls here are for standing seam metal roofing and snow guards. The heavy wet snow that slides off roofs can rip gutters right off the fascia, and ice dams at the eaves are a real problem on high-elevation homes. We install snow guards and ice protection that keep the snow where it belongs, and we use fasteners and panels that can handle the wind. When hail hits, we're the ones who get called to repair the dents and leaks.

Our services in Billings

How a Job Works in Billings

Step 1: Give us a call at (406) 717-6530 or request a free estimate online. We'll schedule a time to come out and look at your roof, whether you're in a tight South Side lot or a bigger property out in the Heights. We'll inspect the current roof, check the flashing and fasteners, and talk through your options: repair, replacement, or a retrofit over existing shingles. You'll get a written estimate with clear pricing.

Step 2: Once you approve, we handle the work. In Billings, that often means coordinating with the city on permits, especially for a full replacement. Roofing permits are commonly required here, and thresholds and fees vary, so we always check with the local building department before we start. If you're in a historic district or an HOA, we'll help you navigate the design review for panel profile and color. We also plan for access: some older neighborhoods have narrow driveways and mature trees, so we bring the right equipment and protect your landscaping.

Step 3: When we're done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you're happy. We leave your property clean and your roof ready for the next Montana season.

Pricing for metal roofing in Billings depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and a metal roof replacement starts at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. For storm damage, we offer a free inspection, and we can document the damage for your insurance claim (though coverage is always up to your insurer). The best way to get an accurate number is to call us at (406) 717-6530 for a free estimate. We'll look at your roof, talk through your options, and give you a clear price.

My South Side home has a steep gable and a brick chimney. Can you match the flashing so it doesn't leak?
Yes. Older South Side and downtown homes often have brick chimneys and dormers that need custom flashing. We fabricate and install flashing that fits tight against the masonry and the roof pitch, and we seal it properly to prevent leaks. We've worked on many of these early-1900s homes and know how to handle their quirks.
A storm just blew through and I think my metal roof is damaged. How fast can you get out to Billings?
We offer free storm damage inspections and prioritize emergency calls in Billings and the surrounding area. Call us at (406) 717-6530 and we'll schedule a visit as soon as possible, usually within a day or two depending on demand. We'll assess the damage, tarp if necessary, and give you a repair estimate.
What does a typical metal roof cost in Billings for a 1,500-square-foot ranch?
For a 1,500-square-foot ranch with a low-pitch roof, you're looking at roughly $12,000 to $18,000 for a standard metal roof installation, depending on material and accessories. Standing seam would be on the higher end. We provide free estimates so you can get an exact price for your home.
Do I need a permit to replace my roof in Billings?
In most cases, yes. Roofing permits are commonly required for a full replacement or re-roof in Billings, and requirements vary by jurisdiction. We always check with the local building department before starting work. You can also verify details on the City of Billings website. We handle the permit process for you.
My HOA has rules about roof color. Can you help with approval?
Absolutely. Many HOAs in West End neighborhoods like Rehberg Ranch and Lake Hills have design guidelines for roof color and panel profile. We can provide samples and documentation to submit for approval, and we'll coordinate with your HOA to make sure the installation meets their requirements.
Are you insured for roofing work in Billings?
Yes, we are fully insured with both general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Billings to handle the snow and hail?
Metal roofs are low-maintenance, but in Billings it's smart to check fasteners and seals annually, especially after a big hail event. Snow guards should be inspected before winter to make sure they're secure. We offer inspections and maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm