Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Rockvale, MT (59026) · Local Professionals

Billings Metal Roofing · Fast response in Rockvale and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rockvale is a small ranching and farming community tucked into the Yellowstone River valley just south of Billings, where wide lots, gravel drives, and a mix of older farmhouses and newer ranch homes sit against the big Montana sky. The wind comes off the river bottoms and the benches with nothing to stop it, and hail and heavy wet snow are just part of life here.

That is why folks in Rockvale (59026) call Billings Metal Roofing. We know how metal holds up to the chinooks that swing temperatures 40 degrees in a day and the summer supercells that pock shingles. Whether your place is a ranch house off the East River Road or a shop building on a gravel road, we can help.

Metal Roofing in Rockvale (59026)

Rockvale sits on clay and gravelly soil in the river valley, and many properties here have outbuildings, shops, and barns that take the brunt of the weather. The wind that funnels down the Yellowstone can lift panels and work fasteners loose over time. Heavy wet snow slides off steep pitches and can pile up at the eaves, which is why ice dams and snow guards are a common request. Hail here is no joke either. It can crack shingles and dent softer metals, so we often recommend standing seam or stone-coated steel for the main house and corrugated panels for shops and barns. Access can be tight on some of the older farmsteads, with narrow drives and overhead lines, so we plan the staging before we ever set foot on the roof.

Our team has worked all over Yellowstone County, from the river bottoms toward Laurel and Huntley to the benches and the West End. We understand how metal performs in this specific climate, and we bring that experience to every Rockvale job.

Our services in Rockvale

How a Job Works in Rockvale

Step 1: You call us at (406) 717-6530 or request a free estimate online. We schedule an on-site visit, inspect your roof and attic if needed, and talk through what you are seeing. We will check for loose fasteners, separated seams, flashing gaps, and signs of ice damming. You get a written estimate with options, not pressure.

Step 2: Once you approve, we handle the work. We pull the permits required by the local building department (rules vary by jurisdiction, so we verify before we start). On older farmsteads, we plan for tight turns and overhead lines. If your place is in an HOA or historic district, we help with the design review paperwork. We protect your landscaping and keep the site organized. For replacements, we remove the old roof, inspect the decking, and install the new metal system with proper underlayment and flashing.

Step 3: We clean up every day and do a final walkthrough with you. We use magnets to pick up screws and nails, and we make sure gutters and downspouts are clear. You get a chance to ask questions and see the finished work before we leave. We leave your property clean.

Pricing in Rockvale depends on the size and pitch of your roof, the condition of the decking, access, and how soon you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and over-shingle retrofit at $7. Corrugated and ribbed panel roofing starts at $5.50, and stone-coated steel and metal shingle start at $9. Copper and specialty metals start at $20. Repairs start at $450, and snow guards start at $1,200. We give free estimates, so call (406) 717-6530 and we will give you a realistic number for your property.

My ranch house near the Yellowstone River has ice dams every winter. Will snow guards help?
Yes, snow guards are one of the best investments for river-valley homes here. They hold the snow in place so it melts gradually instead of sliding off in a dangerous sheet that can tear gutters and damage whatever is below. We install snow guards and ice protection starting at $1,200, and we can also check your attic insulation and ventilation because those often contribute to ice dams.
A windstorm just peeled back some panels on my shop roof in Rockvale. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call us at (406) 717-6530 and we will schedule a visit as soon as possible. We can tarp or secure the area to prevent further damage and then give you a repair estimate.
What does a metal roof replacement cost for a typical Rockvale farmhouse?
Most replacements fall between $9 and $12 per square foot installed, depending on the panel type, roof complexity, and whether we need to replace decking. A simple gable roof on a 1,500-square-foot home might start around $13,500, while a more complex roof with dormers and valleys will be higher. We give free estimates so you get an accurate number.
Do I need a permit to replace my roof in Rockvale?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and fees vary by jurisdiction. We always check with the local building department before starting work and handle the permit application for you. If your property is in a historic district or HOA, there may be additional design review requirements.
My neighbor's tree branches hang over my roof. Can I trim them, and do I need HOA approval for a metal roof?
You generally have the right to trim branches that cross your property line, but it is best to talk with your neighbor first. For HOA approval, we can provide product specifications and color samples to submit to your architectural review committee. We recommend getting approval before ordering materials.
Are you insured for roofing work at my Rockvale property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Rockvale's climate?
Check fasteners and seams annually, especially after high-wind events. Clear gutters and downspouts in spring and fall. Inspect flashing around chimneys and skylights. In heavy snow years, use a roof rake to prevent ice dams at the eaves. We offer inspections and maintenance plans to keep your roof in good shape.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm