Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Park City, MT (59063) · Local Professionals

Billings Metal Roofing · Fast response in Park City and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Park City is a small town where the lots are wide, the wind comes off the Yellowstone Valley, and most homes sit on clay and gravel that shifts with the seasons. You see a mix of older farmhouses, newer builds on larger lots, and a few shops and barns along the highway, all taking the same hail and snow that roll through south-central Montana.

Homeowners in Park City call Billings Metal Roofing because we know how metal holds up here. We are based in Billings, just up the road, and we have worked on enough roofs in 59063 to know that a standing seam or stone-coated steel roof is often the right call for the wind and hail that come with this stretch of the valley.

Metal Roofing in Park City (59063)

Park City sits on a mix of flat and gently sloping ground, with a lot of clay and gravelly soil that can make drainage and foundation work tricky. The wind here can swing forty degrees in a day and peel back panels that were not fastened right, and summer storms drop hail that pocks asphalt shingles. Many homes have low-pitched roofs that are prone to ice dams at the eaves in winter, and the heavy wet snow can slide off metal roofs in sheets if snow guards are not in place. We see a lot of older farmhouses and newer builds on larger lots, plus a few commercial and agricultural buildings that need metal that can take a beating.

Our team has been working in Park City and the surrounding Billings area for years, and we understand the local building stock. We know that a lot of homes here have steep gables and deep porches, and that access can be tight on some of the smaller lots. We also know that permits and inspections vary by jurisdiction, so we always check with the local building department before we start.

Our services in Park City

How a Job Works in Park City

Step 1: You call us at (406) 717-6530 or fill out our online form, and we schedule a free on-site assessment. We look at your roof, your attic, and your gutters, and we talk to you about what we find. We give you a written estimate that covers materials, labor, and any permits needed.

Step 2: Once you approve the estimate, we order materials and schedule the work. In Park City, we often need to coordinate with the local building department for permits, and we handle that for you. If your home is in an HOA or historic district, we help you get the design review done. On tight lots, we plan where to stage materials and how to get equipment in without tearing up your yard.

Step 3: When the work is done, we clean up the site completely. We walk through the job with you, show you what we did, and make sure you are satisfied. We leave your property clean and your roof ready for the next Montana storm.

Pricing for metal roofing in Park City depends on the size of your roof, the pitch, the condition of the existing roof, and how accessible the site is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening start at $750. We also offer metal roof coating and painting from $2.50 per square foot, and gutters for metal roofs from $9 per linear foot. For a free estimate tailored to your Park City home, call us at (406) 717-6530.

My Park City home has a low-pitched roof that gets ice dams every winter. Can a metal roof help?
Yes. A properly installed standing seam metal roof with snow guards and ice protection can reduce ice dams by allowing snow to shed safely and preventing meltwater from refreezing at the eaves. We also check your attic insulation and ventilation, because those often contribute to ice dams. We can install snow guards and ice protection starting at $1,200.
A storm just blew through Park City and lifted some panels on my roof. How fast can you respond?
We offer free inspections for storm and wind damage, and we prioritize emergency repairs. Call us at (406) 717-6530 and we will schedule a visit as soon as possible. We can tarp or secure the roof to prevent further damage, then give you a repair estimate.
What does a metal roof replacement cost for a typical Park City home?
Most Park City homes fall in the range of $9 to $14 per square foot for a metal roof replacement, depending on the material and complexity. A basic corrugated panel roof might start around $5.50 per square foot, while standing seam or stone-coated steel is higher. We provide a free estimate so you know exactly what your roof will cost.
Do I need a permit for a metal roof in Park City, and how do I get one?
Yes, roofing permits are commonly required for a full replacement or re-roof in Park City. The exact requirements and fees vary, so we always check with the local building department before starting. We handle the permit application for you and make sure the work meets all local codes.
My neighbor and I share a property line, and I want to make sure my new roof does not cause drainage issues on their side. What should I do?
We can adjust gutter placement and downspouts to direct water away from the property line. If you are in an HOA, we also help with design review. We always recommend talking with your neighbor before the work starts to avoid surprises.
Are you fully insured for roofing work in Park City?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Park City's climate?
We recommend an annual inspection, especially after hail or wind storms. Check fasteners and seals, clear debris from gutters, and make sure snow guards are secure. We offer metal roof inspections starting with a free estimate, so call us to schedule one.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm