Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Shepherd, MT (59079) · Local Professionals

Billings Metal Roofing · Fast response in Shepherd and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shepherd is a small farm town just northeast of Billings where the open ground starts and the wind never really stops. Most homes here sit on big lots or acreage, many with a shop, a barn, or both, and the roofs take a beating from hail, chinook gusts, and heavy wet snow that slides off in sheets.

We are Billings Metal Roofing, and we work Shepherd and the 59079 ZIP code because we know what these rural properties need. Whether you are off Shepherd Road or out toward the Yellowstone valley, we have seen how fast a shingle roof fails out here and how well a properly installed metal roof holds up.

Metal Roofing in Shepherd (59079)

Shepherd sits on open ground northeast of Billings, and that exposure is the first thing we look at. Properties here are often on larger lots with farm buildings, shops, and barns, so we deal with long roof runs, low-slope additions, and outbuildings that need metal rather than shingles. The soil is clay and gravelly in places, which affects drainage around the foundation and how we handle gutter discharge. Access can be tight for equipment when you are off a gravel drive or behind a fence line, and we plan for that before the crew shows up. The wind is the real story: chinook gusts can peel a poorly fastened panel, and summer hail pocks shingles and dents softer metals. We spec fasteners and panel profiles for that, not for a mild climate.

We have worked across the Billings area, from the South Side and the Heights to Lockwood and Huntley, and Shepherd is a regular stop for us. Our team knows the difference between a ranch house roof and a barn roof, and we bring the right approach for each.

Our services in Shepherd

How a Job Works in Shepherd

Step 1: You call us at (406) 717-6530 or request a free estimate online. We set a time to come out to your property in Shepherd, walk the roof, check the flashing and fasteners, and talk through what you are seeing. You get a written scope and a clear price before anything starts.

Step 2: Once you approve, we schedule the work. For a full replacement or a retrofit over shingles, we confirm what the local building department requires for permits and inspections, since thresholds vary by jurisdiction. If your place is off a gravel road or has a gate, we coordinate access so the crew and materials get in without tearing up the yard. We protect landscaping and outbuildings, then tear off or prep the deck and install the panels or shingles to spec.

Step 3: We clean up every day and do a final walkthrough with you. Magnets go over the ground for nails, gutters get checked, and we make sure the flashing and ridge caps are right. You see the finished roof and know what was done before we leave.

Pricing in Shepherd depends on the roof, but here are realistic starting points from our service list. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often a good fit for shops and barns. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Snow guards and ice protection start at $1,200. The main cost factors are roof size and pitch, how many layers you have now, access for equipment, and whether there is storm damage to document. Call (406) 717-6530 for a free estimate on your Shepherd property.

My barn and shop out on the acreage have corrugated panels that are backing out screws. Can you fix that without replacing the whole roof?
Yes, that is common on Shepherd outbuildings. We inspect the panels and washers, replace the failed fasteners with the right screws for the panel profile, and re-fasten any loose runs. If the panels are still sound, screw replacement and re-fastening starts at $750 and saves you a full replacement.
A storm just peeled back part of my roof and it is leaking. How fast can you get to Shepherd?
Call us at (406) 717-6530 and tell us what happened. We offer free storm and wind damage inspections, and we prioritize active leaks. We can tarp or secure the area to stop further damage, then document what we find for your records and give you a repair or replacement estimate.
What does a typical metal roof cost for a ranch house in Shepherd compared to a repair?
For a ranch house, installation starts at $8 per square foot and standing seam at $10, so a typical roof lands in the thousands depending on size and pitch. A repair or leak fix starts at $450. If your roof is older and failing in several places, replacement is often the better long-term number, and we will show you both options.
Do I need a permit to re-roof my house or shop in Shepherd?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We confirm the requirements with the local building department before work starts, including inspection steps and any limits on how many layers you can recover over. You do not have to sort that out yourself.
My neighbor says my new roof panels might cross the property line. How do you handle that?
We build to your property and keep overhangs and gutter discharge on your side. If there is any question about the line, we ask you to confirm it before we order materials, and we can adjust the layout. If your subdivision has an HOA with design review, we help coordinate the panel profile and color approval before installation.
Are you insured for work on my Shepherd property, and what does that cover?
Yes, we are fully insured with general liability and workers' compensation. That covers our crew and the work on your property. We are happy to provide proof of insurance before we start so you have it for your records.
What should I do about ice dams and snow sliding off my metal roof in Shepherd?
Metal roofs shed snow, which is good, but ice can still form at the eaves and gutters. We install snow guards and ice protection starting at $1,200 to keep snow from dumping on walkways and doors. A fall inspection also catches loose fasteners and flashing gaps before winter, and we offer free estimates for that check.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm