Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Fromberg, MT (59029) · Local Professionals

Billings Metal Roofing · Fast response in Fromberg and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fromberg is a small farm-valley town where the Clark's Fork meets the Yellowstone, and most of the homes and outbuildings here have been taking hail and heavy snow for decades. You'll see early-1900s farmhouses with steep gables, low-slung ranches, and plenty of sheds and shops with metal roofs that have seen better days. The lots are wide and open, the wind comes across the valley hard, and the weather swings fast.

When a roof starts leaking or a storm peels back a panel, folks in Fromberg (59029) call Billings Metal Roofing because we know this valley. We've worked on everything from old barns near the Clarks Fork to ranch homes off Highway 310, and we treat every roof like it's our own.

Metal Roofing in Fromberg (59029)

Fromberg sits in the Yellowstone River valley where the ground is a mix of clay and gravel, and the wind never seems to stop. That means roofs here face more than just snow and rain. The heavy wet snow we get in winter can slide off in big sheets and tear off gutters or damage anything below, and ice dams form at the eaves on older homes with poor insulation. Summer supercells drop hail that pocks shingles and dents softer metals, and chinook winds can swing temperatures 40 degrees in a day, which works on fasteners and seams. Most of the homes here are single-story ranches or older farmhouses with steep gables, and many have sheds, shops, or barns with corrugated or ribbed panel roofs that need repair or replacement after a few decades.

Our team has been serving Fromberg and the surrounding Billings area for years, and we've seen just about every kind of roof problem this valley can throw at you. We know which panel profiles hold up to the wind, how to flash a chimney on an old brick house, and why standing seam is often the best choice for a home that takes a beating from the elements.

Our services in Fromberg

How a Job Works in Fromberg

Step 1: You call us at (406) 717-6530 or fill out our contact form, and we'll set up a free on-site assessment. We'll look at your roof, check for leaks, damaged panels, or worn fasteners, and talk through your options. No pressure, no sales pitch, just an honest evaluation and a written estimate.

Step 2: Once you approve the estimate, we schedule the work. In Fromberg, that might mean coordinating with the local building department for permits, especially for a full replacement. We handle the paperwork and make sure everything is done to code. If your property is on a tight lot or has difficult access, we'll plan accordingly so there are no surprises.

Step 3: When the job is done, we clean up thoroughly. We haul away old materials, sweep the site, and do a final walkthrough with you to make sure you're happy with the work. We don't consider a job finished until you're satisfied.

Pricing for metal roofing in Fromberg depends on the size and condition of your roof, the type of metal you choose, and how accessible the property is. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a full replacement is around $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs, like fixing a leak or replacing screws, start at $450. We also offer free estimates for storm damage and inspections, so you know exactly what you're dealing with before you commit. Call us at (406) 717-6530 to get a ballpark figure or to schedule your free estimate.

My old barn near the Clarks Fork has a corrugated metal roof that's rusted through in spots. Can you repair it or do I need a full replacement?
It depends on how much rust there is. If it's just a few spots, we can often replace those panels and treat the rest. But if the rust is widespread or the panels are thin, a full replacement with a heavier gauge panel is usually more cost-effective in the long run. We'll take a look and give you an honest recommendation.
A storm just blew through Fromberg and lifted some panels on my roof. How quickly can you get out to fix it?
We prioritize storm damage calls. Give us a call at (406) 717-6530 and we'll schedule an inspection as soon as possible. If there's an active leak, we can do temporary repairs to prevent further damage while we wait for materials or better weather.
What's the typical cost to replace a metal roof on a 1,500-square-foot ranch house in Fromberg?
For a 1,500-square-foot ranch, a basic metal roof installation might run between $12,000 and $15,000, depending on the panel type and pitch. Standing seam would be higher, around $15,000 to $18,000. These are ballpark figures; we'll give you an exact quote after inspecting your roof.
Do I need a permit to replace my roof in Fromberg, and can you help with that?
Yes, the town of Fromberg typically requires a permit for a full roof replacement. The rules can vary, so we always check with the local building department. We handle the permit application for you and make sure the work meets all code requirements.
My neighbor and I share a property line, and my new metal roof will overhang slightly. Do I need to worry about HOA rules or property line issues?
In Fromberg, most properties don't have an HOA, but if you're in a subdivision with one, check the covenants first. As for property lines, a small overhang is usually fine, but it's best to talk to your neighbor before installation. We can help you understand the rules and avoid any disputes.
Are you fully insured for roofing work in Montana?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your property.
What should I do to maintain my metal roof in Fromberg's climate?
Inspect your roof twice a year, especially after big storms. Check for loose screws, damaged panels, and debris in gutters. Keep snow from piling up too deep at the eaves to prevent ice dams. If you see any issues, call us for a quick repair before they turn into bigger problems.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm