Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Ballantine, MT (59006) · Local Professionals

Billings Metal Roofing · Fast response in Ballantine and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ballantine is a small farm town where the Yellowstone River bottoms meet the dry benchland, and most homes and outbuildings here have one thing in common: they take a beating from hail. If you live off Ballantine Road or near the old school, you know the sound of a summer storm rolling in off the plains.

We are Billings Metal Roofing, and we work Ballantine and the surrounding Yellowstone County every week. From the modest ranches and farmhouses along the river to the newer places out toward Huntley, we have seen what spring hail and winter ice do to a roof. That is why so many folks in 59006 call us for metal roof repair or a metal roof over shingles retrofit instead of another round of asphalt.

Metal Roofing in Ballantine (59006)

Ballantine sits at about 3,100 feet in the Yellowstone Valley, and the ground here tells the story. You have clay and gravelly soil that shifts with the freeze and thaw, and a lot of properties are on larger farm lots with sheds, shops, and barns that were never built with modern roof ventilation in mind. The wind that comes down off the benches can peel a cheap panel in one chinook, and the summer supercells that roll through drop hail that pocks asphalt shingles in a single afternoon. We see a lot of older low-slope shingle roofs on the farmhouses and a growing number of standing seam and stone-coated steel roofs on the newer places, and both need different handling.

Our team has worked roofs from the river bottoms up toward the bench, and we know how to deal with the tight access on some of these older farmsteads and the long runs on the shops. We are fully insured with general liability and workers' compensation, and we pull the permits that the local building department requires for a full replacement. We also help document storm damage for insurance, though coverage is always up to your carrier.

Our services in Ballantine

How a Job Works in Ballantine

Step 1: You call us at (406) 717-6530 or send a note, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and look at the attic and eaves if you have ice dam concerns. We give you a written estimate and talk through whether a repair, a retrofit over your existing shingles, or a full replacement makes the most sense for your place.

Step 2: Once you approve, we schedule the work and handle the permit with the local building department. On farm properties we plan around equipment and livestock access, and on smaller lots in town we keep the staging tight so we are not blocking your neighbors. We order materials for your panel profile and color, and we protect your landscaping and any outbuildings before we start tearing off or going over.

Step 3: We clean up every day and do a final magnetic sweep for nails. We walk the finished roof with you, show you the flashing details and fasteners, and make sure you know how the snow guards and gutters are set. We leave your property clean and your questions answered.

Pricing in Ballantine depends on the size and pitch of your roof, how many layers are already there, and how easy it is to get to. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a metal roof over shingles retrofit starts around $7. Common repairs like a leak or a flashing fix start around $450, screw replacement and re-fastening starts around $750, and gutters for metal roofs start around $9 per linear foot. Snow guards and ice protection start around $1,200. We give free estimates, so call (406) 717-6530 and we will put real numbers on your job.

My farmhouse off Ballantine Road has two layers of old shingles and I keep getting hail dings. Can you go over the top with metal?
Often yes, but it depends on the condition of the deck and the local code limit on existing layers. We inspect the roof first, and if a retrofit makes sense we use a metal roof over shingles system starting around $7 per square foot. If the deck is soft or the layers are too thick, we will tell you straight and quote a tear-off instead.
A storm just peeled back panels on my shop near the Huntley highway. How fast can you get out?
Call us at (406) 717-6530. We prioritize active leaks and wind damage in the Ballantine area, and we can often get out the same day or next to tarp or secure the roof. We document the damage for your insurance claim and give you a written repair estimate on site.
What does a typical metal roof repair cost in 59006?
Most repairs start around $450 for a leak or flashing issue, and screw replacement and re-fastening starts around $750. The final number depends on how many fasteners are failed, whether the leak is at a seam or a penetration, and how accessible the roof is. We give a free estimate before any work starts.
Do I need a permit to replace my roof in Ballantine?
A full replacement or re-roof usually requires a permit, and the rules and fees are set by the local building department. We confirm the requirements with them before we start and pull the permit for you. Historic or design review can also apply in some areas, so it is worth checking early.
My neighbor and I share a property line and I am worried about the roof runoff. What do you do about that?
We set gutters and downspouts to keep water on your side of the line and away from the foundation, and we can talk through the grade with you. If there is an HOA, we coordinate the panel profile and color approval before ordering. We do not cross property lines without permission.
Are you insured for work on my Ballantine property?
Yes. That protects you if anything goes wrong on the job.
What should I do about ice dams at the eaves on my place west of town?
Ice dams form when heat escapes and meltwater refreezes at the cold eaves. We check the attic insulation and ventilation, and we install snow guards and ice protection starting around $1,200 to keep snow from sliding and tearing off gutters. A metal roof with proper flashing handles this better than shingles, but the attic details matter just as much.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm