Serving the Billings area  ·  (406) 717-6530  ·  Open Mon-Sun 7am-7pm
📞 (406) 717-6530 Free Quote

Metal Roofing in Roundup, MT (59072) · Local Professionals

Billings Metal Roofing · Fast response in Roundup and the Billings area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+232Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Roundup is a ranch town where the wind comes off the Bull Mountains and hits your roof like a freight train. Most homes here are older ranch styles and farmhouses with low-pitch shingle roofs, plus a fair number of sheds and shops that have been patched one too many times. If you live near the Musselshell County Fairgrounds or out on the flats toward Klein, you know exactly what a Montana hailstorm can do to a roof.

That is why folks in Roundup (59072) call Billings Metal Roofing. We understand the cold winters, the heavy wet snow that slides off in slabs, and the chinook winds that can peel a panel right off. We are based in Billings and serve Roundup and the surrounding areas, so we know the drive and we know the local building stock. Our team is fully insured and we do free inspections, so you can get a straight answer before you spend a dime.

Metal Roofing in Roundup (59072)

Roundup sits in a valley where the ground is a mix of clay and gravel, and that matters for how we anchor a roof. The older homes around Main Street and the courthouse square often have steep gables and deep porches, which means we are working with ladders and staging on uneven ground. Out on the ranches and acreages toward Melstone or Hysham, you have long, low roofs on shops and barns, and access can be tight for a trailer. The wind here is constant, so we pay extra attention to fasteners and seam engagement, especially on standing seam and corrugated panels. Hail is the other big issue. We have seen shingles on Roundup homes pocked so badly they look like golf balls, and that is when a metal roof starts to make real sense.

Our team has worked on everything from early-1900s farmhouses to newer stucco homes with multi-gable roofs. We know how to handle the ice damming that happens at the eaves when snow melts and refreezes, and we know which panel profiles hold up best to the chinook winds that swing temperatures 40 degrees in a day. Whether you need a full replacement, a retrofit over existing shingles, or just a repair after a storm, we have the experience to do it right.

Our services in Roundup

How a Job Works in Roundup

Step 1: You call us at (406) 717-6530 or fill out our online form. We schedule a free on-site assessment at your Roundup property, whether you are in town or out on a county road. We inspect the roof, check the flashing and fasteners, and look for signs of leaks or storm damage. Then we give you a written estimate with options, no pressure.

Step 2: Once you approve the estimate, we pull the necessary permits with the City of Roundup or Musselshell County, depending on where you are located. We schedule the work around the weather, which in this part of Montana means watching for wind and rain. On retrofit jobs over existing shingles, we verify the number of layers first because code limits how many you can recover. Our crew keeps a clean site, and we protect your landscaping and siding as we work.

Step 3: When the job is done, we walk the roof with you, show you the finished work, and make sure you are satisfied. We haul away all old materials and debris, and we leave your property as clean as we found it. We also give you maintenance tips so you get the most life out of your new metal roof.

Pricing for metal roofing in Roundup depends on the size and pitch of your roof, the material you choose, and how accessible the property is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you want to go over existing shingles, a retrofit starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a typical ranch home in Roundup, most homeowners are looking at a few thousand to several thousand dollars depending on the scope. We always provide a free estimate so you know exactly what you are paying for, and we stand behind our work. Call (406) 717-6530 to schedule yours.

My house is near the Musselshell County Fairgrounds and the roof is original to the 1960s. Can you do a metal roof over shingles?
Yes, we can often install a metal roof over your existing shingles, which saves you the cost of tear-off. But Montana code limits how many layers you can have, so we first check how many layers are on your roof. If it is just one layer, a retrofit is usually a good option. We will inspect and let you know for sure during your free estimate.
A storm just blew through Roundup and lifted some panels on my barn. How fast can you get out for an emergency repair?
We prioritize storm damage calls in the Roundup area. Call us at (406) 717-6530 and we will schedule the soonest available inspection, often within a day or two depending on the season. We can tarp or secure the roof if needed and give you a repair estimate on the spot.
What does a typical metal roof repair cost in Roundup?
Most repairs start at $450, which covers common issues like leak repair, flashing fixes, or replacing a few damaged panels. The final cost depends on the extent of the damage and the type of metal roof you have. We give you a firm quote before we start any work.
Do I need a permit for a new metal roof in Roundup?
Yes, a permit is commonly required for a full replacement or re-roof in Roundup and Musselshell County. The exact requirements and fees vary, so we always check with the local building department before we start. We handle the permit application for you as part of the job.
My neighbor and I share a property line, and I want to make sure the new roof does not cause drainage issues. What should I do?
We can adjust gutters and downspouts to direct water away from the property line. If you are in an HOA, we also help you get approval for the panel profile and color. Just let us know about any property line concerns during the estimate, and we will work with you to keep the peace.
Are you fully insured for roofing work in Roundup?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide a certificate of insurance upon request so you can verify our coverage before we start.
What maintenance does a metal roof need in Roundup's climate?
Metal roofs are low maintenance, but in Roundup you should check fasteners and seals annually, especially after winter. Ice dams can form at the eaves, so keep gutters clear and consider snow guards if you have a steep roof. We offer inspections and maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in Billings

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Billings

All your work handled by qualified professionals in Billings

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

232+ Verified Client Reviews in Billings

⭐⭐⭐⭐⭐ 4.9/5 · 232 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Billings · Response within 24h · No commitment · ☎ (406) 717-6530

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Billings ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm